 |
Credit
Card Merchant Services
|
 |
|
Shopping
|
|
|
|
|
|
Custom Dana 44 front axle shafts are available in 19 spline and 30 spline chromoly 4340. Axles are machined to accept full circle clips.
High tensile strength chromoly is heat-treated twice to produce these heavy-duty axles that are up to 30% stronger.
Includes: 2 - outers axle stubs (Ford or GM), 2 - inner axles (1 - short, 1 - long).
The inner axles are custom ordered to your specific application for a length of up to 39" long. Specify the exact length you need and we cut and spline them just for you.
Inner axle shafts must be measured from center line of U-joint to the end of the shaft.
Double check your measurements and enter them into our system in the box below.
We do not recommend using specifications that manufacturers provide or publish. We recommend that you measure.
These are custom length axles and non-returnable.
Outer axle shafts are available for Ford or GM. Please make your selection below.
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Kit does not come with U-joints. Alloy X-Joint or CTM's recommended.
Allow 3 weeks for shafts to be made.
Build it right the first time!
FREE Shipping - Limited Time Offer!
| Regular Price: | $ 665.00 / kit |  | | Sale Price: | $ 625.00 / kit |
|  |
| |
Custom Dana 60 front axle shafts are chromoly 4340 with 35 spline axle.
High tensile strength chromoly is heat-treated twice to produce these heavy-duty axles that are up to 30% stronger.
Axles are machined to accept full circle clips.
Includes: 2 - outer axle stubs (GM or Ford), 2 - inner axles (1 - short, 1 - long).
The inner axles are custom ordered to your specific application for a length of up to 39" long. Specify the exact length you need and we cut and spline them just for you.
Inner axle shafts must be measured from center line of U-joint to the end of the shaft.
Double check your measurements and enter them into our system in the box below.
We do not recommend using specifications that manufacturers provide or publish.
These are custom length axles and not returnable.
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Kit does not come with U-joints. (CTM's recommended)
Allow 3 weeks for shafts to be made.
Build it right the first time!
FREE Shipping - Limited Time Offer!
| Regular Price: | $ 785.00 / kit | | | Sale Price: | $ 750.00 / kit |
| |
|
Are larger tires making your vehicle a bit sluggish? Upgrade your gears and restore your performance.
These are affordable high strength matched ring and pinion gear sets. They are made from the highest quality 8620 forgings and the latest Gleason gear cutting technology.
These gears are made to last!
Alloy USA 3 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Buy yours today!
Product recommendation: R & P Overhaul kit #DA352033X for Rubicon front / rear Dana 44
| Regular Price: | $ 190.00 / each | | | Sale Price: | $ 175.00 / each |
| |
| |
Coast's new Mustang Ultra-Light Aluminum Driveshaft is designed specifically for the 2005-2007 Gen-5 Ford Mustang. Developed to fill the needs of hardcore racers, the Gen-5 Mustang Ultra-light Aluminum Driveshaft is an easy bolt-in replacement for the heavy and awkward OEM steel driveshaft provided from the factory. This simple driveshaft modification will provide a noticeable performance improvement on any Gen-5 Mustang and is much safer than the stock steel shaft on vehicles with significant horsepower upgrades.
The rotational effect of weight is magnified in a driveshaft but the ultra-lightweight construction of this aluminum driveshaft requires less energy to overcome its inertia, transferring more horsepower to the wheels. Constructed of tough, lightweight T6061 Aluminum tube the Gen-5 Mustang Ultra-Light Aluminum Driveshaft will provide long-lasting performance. The driveshaft also features durable, rebuildable Dana Spicer 1330-series U-joints to handle maximum horsepower. Installation is a snap with the supplied aluminum adapter plate and factory Ford mounting bolts.
· Fits 2005-2007 Gen-5 Mustangs
· Constructed of tough, lightweight T6061 Aluminum
· Simple, direct bolt-on installation, with supplied adapter plate and included factory bolts
· Half the weight, compared to the factory steel shaft
· Dana Spicer 1330-series u-joints
· Fully balanced and rebuildable
· 1 year warranty
Free Shipping Introductory Offer - Buy yours today!
| Regular Price: | $ 730.00 / Each | | | Sale Price: | $ 675.00 / Each |
| |
|
|
|
| |
|
DrivetrainOutlet.com
Placerville, CA
e-mail: Sales@DrivetrainOutlet.com
Powered by Fortune3
E-Commerce Solutions - Ecommerce Shopping Cart Software |
|
|
|
|
