 |
Credit
Card Merchant Services
|
 |
|
Shopping
|
|
|
|
Chromoly Dana 44 front axle shafts.
|
|
Custom Dana 44 front axle shafts are available in 19 spline and 30 spline chromoly 4340. Axles are machined to accept full circle clips.
High tensile strength chromoly is heat-treated twice to produce these heavy-duty axles that are up to 30% stronger.
Includes: 2 - outers axle stubs (Ford or GM), 2 - inner axles (1 - short, 1 - long).
The inner axles are custom ordered to your specific application for a length of up to 39" long. Specify the exact length you need and we cut and spline them just for you.
Inner axle shafts must be measured from center line of U-joint to the end of the shaft.
Double check your measurements and enter them into our system in the box below.
We do not recommend using specifications that manufacturers provide or publish. We recommend that you measure.
These are custom length axles and non-returnable.
Outer axle shafts are available for Ford or GM. Please make your selection below.
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Kit does not come with U-joints. Alloy X-Joint or CTM's recommended.
Allow 3 weeks for shafts to be made.
Build it right the first time!
FREE Shipping - Limited Time Offer!
| Regular Price: | $ 665.00 / kit |  | | Sale Price: | $ 625.00 / kit |
|  |
| |
High tensile strength 4340 chromoly is heat-treated twice to produce these heavy-duty outer axles shafts that are up to 30% stronger.
Dana 44 Ford front outer axle shafts are 19 spline chromoly 4340. Axles are machined to accept full circle clips.
Ford outer stub length is 9.720".
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Outer axles do not come with U-joints. Alloy X-Joint or CTM's recommended.
Sold as a pair.
Build it right the first time!
Price:$ 249.00 / pair | |
|
High tensile strength 4340 chromoly is heat-treated twice to produce these heavy-duty outer axles shafts that are up to 30% stronger.
Dana 44 GM front outer axle shafts are 19 spline chromoly 4340. Axles are machined to accept full circle clips.
GM outer stub length is 9.940".
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Outer axles do not come with U-joints. Alloy X-Joint or CTM's recommended.
Sold as a pair.
Build it right the first time!
Price:$ 235.00 / pair | |
| |
Custom Dana 44 front axle shafts are available in 19 spline and 30 spline chromoly 4340. These are custom ordered to your specific application for a length of up to 22" long. Specify the exact length you need and we cut and spline them just for you.
High tensile strength chromoly is heat-treated twice to produce heavy-duty axles that are up to 30% stronger. All axles are machined to accept full circle clips.
Inner axle shafts must be measured from center line of U-joint to the end of the shaft. We do not recommend using specifications that manufacturers provide or publish.
Double check your measurements and enter them in the box below.
These are custom length axles and not returnable. They will take approximately 3 weeks to be completed.
Does not come with U-joints. Alloy X-Joint or CTM's recommended.
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Order this item for a single custom length axle up to 22" long.
If you need an axle that is longer see product number DA10441.
Price:$ 235.00 / each | |
|
Custom Dana 44 front axle shafts are available in 19 spline and 30 spline chromoly 4340. These are custom ordered to your specific application for a length from 22" to 39" long. Specify the exact length you need and we cut and spline them just for you.
High tensile strength chromoly is heat-treated twice to produce heavy-duty axles that are up to 30% stronger. All axles are machined to accept full circle clips.
Inner axle shafts must be measured from center line of U-joint to the end of the shaft. We do not recommend using specifications that manufacturers provide or publish.
Double check your measurements and enter them in the box below.
These are custom length axles and not returnable. They will take approximately 3 weeks to be completed.
Does not come with U-joints. Alloy X-Joint or CTM's recommended.
Alloy USA 10 year "No questions asked" manufacturer's warranty.
You break it; you will get a new one!
Order this item for a single custom length axle from 22" up to 39" long.
If you need an axle that is shorter see product number DA10440.
Price:$ 245.00 / each | |
| | |
|
|
| |
|
DrivetrainOutlet.com
Placerville, CA
e-mail: Sales@DrivetrainOutlet.com
Powered by Fortune3
E-Commerce Solutions - Ecommerce Shopping Cart Software |
|
|
|
|
